ILTC0 115/230V料位開關
產品概述
ILTC0 115/230V阻旋式料位開關是一種用于固態物料（包括粉狀、粒狀、塊狀等）的物位檢測設備。該產品采用永磁同步電機驅動葉片旋轉，當葉片接觸物料時會停止轉動并輸出開關信號，適用于料倉上下限位報警。產品具有結構簡單、安裝方便、性能可靠等特點，可廣泛應用于化工、塑料、水泥、制藥、飼料、食品等行業。14
The ILTC0 115/230V rotary paddle level switch is a device for detecting solid materials (including powder, granular, lumpy, etc.). The product uses a permanent magnet synchronous motor to drive the paddle rotation. When the paddle contacts the material, it stops rotating and outputs a switch signal, suitable for upper and lower limit alarms in silos. The product features simple structure, easy installation and reliable performance, widely used in chemical, plastic, cement, pharmaceutical, feed, food and other industries.
技術特點
該產品采用鋁合金外殼和不銹鋼傳動桿，具有防塵、耐腐蝕的特性。獨特的三軸承支撐設計和油封結構可防止粉塵滲入，延長使用壽命。扭力大小可根據物料比重調節，葉片過載時馬達離合器會自動打滑保護電機。產品提供多種電源規格（115V/230V AC），葉片轉速為1轉/分鐘，適用于密度≥0.5g/cm³的物料。工作溫度范圍-10℃至+80℃，高溫型最高可耐400℃。15
The product adopts aluminum alloy housing and stainless steel drive shaft, featuring dustproof and corrosion-resistant properties. The unique three-bearing support design and oil seal structure prevent dust ingress and extend service life. The torque can be adjusted according to material density, and the motor clutch automatically slips to protect the motor when the paddle is overloaded. The product provides multiple power specifications (115V/230V AC) with paddle rotation speed of 1 rpm, suitable for materials with density ≥0.5g/cm³. Operating temperature range is -10℃ to +80℃, with high-temperature version up to 400℃.
工作原理
當料位低于檢測葉片時，電機帶動葉片自由旋轉；當料位上升至接觸葉片時，旋轉受阻使主軸產生位移，觸發微動開關輸出信號。料位下降后，葉片恢復旋轉，設備返回檢測狀態。該機械式檢測原理簡單可靠，不受物料特性（如粉塵、導電性、粘性等）影響，適用于各種工業環境。611
When the material level is below the detection paddle, the motor drives the paddle to rotate freely. When the material level rises to contact the paddle, the rotation resistance causes the main shaft to displace, triggering the micro switch to output a signal. After the material level drops, the paddle resumes rotation and the device returns to detection state. This mechanical detection principle is simple and reliable, unaffected by material characteristics (such as dust, conductivity, viscosity, etc.), suitable for various industrial environments.
應用領域
產品主要應用于料倉、溜槽、輸送設備等場景的料位監測，可連接聲光報警器或PLC系統實現自動化控制。在電力、煤炭、冶金等行業中，用于原煤倉、混煤筒倉、渣庫等部位的堵塞檢測和料位報警。側裝或頂部垂直安裝方式靈活，配備不同長度延長桿（最長1500mm）可適應各種安裝需求。1620
The product is mainly used for level monitoring in silos, chutes and conveying equipment, and can be connected to audible-visual alarms or PLC systems for automated control. In industries such as power, coal and metallurgy, it is used for blockage detection and level alarms in raw coal bunkers, mixed coal silos, slag bins and other locations. Flexible side-mounted or top vertical installation methods, with extension rods of different lengths (up to 1500mm) can adapt to various installation requirements.
產品優勢
- 馬達性能可靠，可長時間連續運轉；
- 獨特油封設計防止粉塵滲入；
- 扭力穩定可調，適應不同比重物料；
- 葉片過載保護機制避免設備損壞；
- 結構緊湊，安裝維護簡便；
- 多種規格槳葉和延長桿可選。1216
Product advantages:
- Reliable motor performance for long-term continuous operation;
- Unique oil seal design prevents dust ingress;
- Stable and adjustable torque for materials of different densities;
- Paddle overload protection mechanism prevents equipment damage;
- Compact structure for easy installation and maintenance;
- Multiple specifications of paddles and extension rods available.
ILTC0 115/230V料位開關
阻旋料位開關產品原理：阻旋料位開關是一種用于固態物料（包括粉狀、粒狀、塊狀、膠狀等）的物位控制器。其利用永磁電機帶動葉片旋轉，當被檢測物料上升至葉片位置時，葉片轉動受阻，該阻力通過傳動軸傳遞到接線盒內的檢測裝置，檢測裝置則向外輸出一個開關信號，并切斷電機電源使葉片停止轉動。當物料下降時，葉片阻力消失，檢測裝置便依靠彈簧的拉力恢復到原始狀態，葉片恢復旋轉狀態。在化工、塑料、鋼鐵、電力、水泥、制藥、飼料、食品等行業得到了的應用。
SR2-10-185當涂電廠用阻旋式料位開關
產品特點：·
進口馬達，可長時間連續運轉；· 油封設計可以防粉塵沿軸滲入；· 扭力,且扭力大小可以調節；· 葉片承受過重負荷時，馬達回轉機構會自動打滑，保護不受損壞；· 接續規格、葉片、長度皆可接受定制。技術參數： · 電源： (A)110VAC (B)220VAC (C)24VAC· 接點容量：5A/250VAC SPDT· 功率：4W· 介電強度： 1500VAC×1min· 葉片轉速：1rpm· 防護等級：IP65· 入線口規格：1/2″PF· 適用小比重：0.3g/ cm3· 溫度：-20～80℃（高溫型耐350℃）· 標準螺紋型」o 接續：1″PFo 適合水平安裝o 接續及牙口至葉片長度可定制·
ILTC0 115/230V料位開關
塑殼配電保護CDM6I-250L/3208 200A
塑殼配電保護CDM6S-800M/4328B 700A 固定式板后接線
塑殼配電保護CDM6I-400M/4300B 315A
BC-8
塑殼斷路器XT2L160 LS/I R63 WMP 4P
塑殼斷路器CPX45-44F
上一篇 ULZB-1L料位開關 http://www.shrjexp.com/product/d167463.html
|
