R7-Z/FGL系列料位開關產品介紹
一、產品概述
R7-Z/FGL系列料位開關是一款面向工業過程控制的智能化監測設備，采用非接觸式探測原理，可實現固體顆粒、粉末及液體介質的連續物位監測。其模塊化設計兼顧通用性與場景適配能力，適用于化工、建材、食品加工、能源等領域的倉儲管理與生產流程控制。設備通過實時反饋物料位置信號，幫助用戶實現精準的庫存管理與自動化生產調度。
二、核心優勢
-
穩定監測機制
雙探頭冗余檢測系統配合智能算法，有效克服介質粘附、粉塵干擾等復雜工況影響。具備溫度補償功能，在-40℃至150℃寬溫域范圍內保持信號穩定性，適應各類極端工業環境。
-
適配拓展能力
支持法蘭/螺紋兩種標準接口規格，可選316L不銹鋼、哈氏合金等材質腔體，滿足食品級衛生要求及強腐蝕性介質場景。提供兩線制/四線制接線方案，兼容主流PLC/DCS系統架構。
-
維護便捷設計
采用分體式結構設計，傳感單元與控制模塊物理隔離，便于現場檢修維護。可視化狀態指示燈與自診斷功能，可快速定位異常狀態，平均故障排查時間縮短60%以上。
三、應用場景
• 水泥廠生料庫高低位預警
• 糧倉谷物存儲量監控
• 石化儲罐液體界面檢測
• 制藥生產線粉體輸送控制
• 環保工程污泥料位管理
四、技術特性
• 防護等級：IP67防塵防水結構
• 響應時間：＜0.5秒
• 輸出信號：SPDT繼電器/4-20mA可選
• 過程連接：1½"NPT/G1½螺紋或定制法蘭
• 電氣接口：M20×1.5電纜密封套
五、服務支持
我們提供全生命周期技術咨詢，包括工況分析選型指導、安裝調試建議及故障診斷支持。針對特殊應用場景可定制探頭長度、輸出方式等參數，確保設備與具體工藝流程的深度契合。
R7-Z/FGL Level Switch Product Introduction
I. Product Overview
The R7-Z/FGL series level switch is an intelligent monitoring device designed for industrial process control. Utilizing non-contact detection principles, it enables continuous level monitoring of solid particles, powders, and liquid media. Its modular design balances universality with scenario adaptability, suitable for storage management and production process control in chemical, construction material, food processing, and energy sectors. By providing real-time material position feedback, the device assists users in achieving precise inventory management and automated production scheduling.
II. Core Advantages
-
Stable Monitoring Mechanism
The dual-probe redundant detection system combined with intelligent algorithms effectively overcomes challenges posed by material adhesion and dust interference. Equipped with temperature compensation function, it maintains signal stability within a wide temperature range of -40℃ to 150℃, adapting to various extreme industrial environments.
-
Adaptability & Expandability
Supports two standard interface specifications (flange/thread), with optional 316L stainless steel or Hastelloy chambers to meet food-grade hygiene requirements and strong corrosive media scenarios. Provides two-wire/four-wire connection solutions compatible with mainstream PLC/DCS systems.
-
Maintenance-friendly Design
Features a split structure with physical isolation between sensing unit and control module, facilitating field maintenance. Visual status indicators and self-diagnostic functions enable rapid fault localization, reducing average troubleshooting time by over 60%.
III. Application Scenarios
• Raw material silo level alerts in cement plants
• Grain storage monitoring in granaries
• Liquid interface detection in petrochemical tanks
• Powder conveying control in pharmaceutical production lines
• Sludge level management in environmental projects
IV. Technical Specifications
• Protection Class: IP67 dust/water resistant
• Response Time: <0.5 seconds
• Output Signal: SPDT relay/4-20mA optional
• Process Connection: 1½"NPT/G1½ thread or custom flange
• Electrical Interface: M20×1.5 cable gland
V. Service Support
We provide full lifecycle technical consultation including working condition analysis, selection guidance, installation recommendations, and fault diagnosis. Customizable probe length and output configurations are available for special application scenarios to ensure deep integration with specific process requirements.
