RT10G料位開關產品介紹（中英對照）
【中文版】
RT10G料位開關是一款基于先進檢測技術研發的工業級物位監測裝置，適用于散裝固體顆�；蚍勰钗锪系牧衔槐O(jiān)控需求。該產品采用非接觸式測量原理，通過高頻信號與物料特性的智能分析實現精準檢測，可有效避免傳統機械式儀表易受物料黏附、磨損等問題的影響。
設備采用模塊化結構設計，主體外殼選用高強度不銹鋼材質，具備IP67防護等級，可在-40℃至+85℃的寬溫域環境中穩定運行。探頭部分配備特殊抗腐蝕鍍層，適用于水泥、塑料粒子、食品原料等多種工業場景。獨特的信號濾波算法有效屏蔽物料流動、設備振動等干擾因素，輸出信號延遲時間不超過0.3秒。
安裝過程無需復雜調試，支持水平、垂直等多種安裝方式�？梢暬癄顟B(tài)指示燈與標準工業接口設計，方便集成到PLC或DCS控制系統。維護周期建議為12-18個月，可通過簡易清潔保持檢測精度。設備運行功耗低于2W，符合工業現場節能需求。
典型應用領域包括：建材行業生料倉庫存監控、糧食加工儲罐滿倉預警、化工原料中間倉料位控制等場景。產品經過嚴苛環境驗證，在粉塵濃度高達200g/m³的工況下仍能可靠工作。建議根據物料介電常數差異選擇對應型號，以獲得最佳適配效果。
【English Version】
The RT10G level switch is an industrial-grade material monitoring device developed with advanced detection technology, designed for reliable level control of bulk solid particles or powdered materials. Utilizing non-contact measurement principles, it achieves precise detection through high-frequency signal analysis and intelligent material characteristic recognition, effectively overcoming challenges like material adhesion and mechanical wear common in traditional devices.
Featuring a modular structure, the device s main housing is constructed from high-strength stainless steel with IP67 protection rating, ensuring stable operation across a wide temperature range from -40℃ to +85℃. The probe incorporates specialized anti-corrosion coating, making it suitable for diverse industrial applications including cement production, plastic pellet handling, and food ingredient processing. Proprietary signal filtering algorithms effectively eliminate interference from material flow and equipment vibration, delivering response times under 0.3 seconds.
Installation requires no complex calibration, supporting both horizontal and vertical mounting configurations. Visual status indicators and standardized industrial interfaces facilitate seamless integration with PLC or DCS control systems. With recommended maintenance intervals of 12-18 months, simple cleaning procedures ensure sustained measurement accuracy. The device operates at less than 2W power consumption, meeting industrial energy efficiency requirements.
Typical applications include: raw material silo monitoring in construction industry, overfill prevention in grain processing tanks, and intermediate material level control in chemical production. Rigorously tested in extreme conditions, the device maintains reliable performance even in environments with dust concentrations up to 200g/m³. Model selection guidance based on material dielectric properties is available to ensure optimal adaptation to specific application requirements.
（中英文合計約730字）
