CDM6I-100M/42002B 63A塑殼電動機保護裝置產品介紹
一、中文版（約450字）
CDM6I-100M/42002B 63A塑殼電動機保護裝置是一款專為工業電動機系統設計的智能保護設備，適用于額定電流63A及以下的三相電動機保護與控制需求。該產品采用模塊化設計理念，通過集成化電路與智能算法，為電動機系統提供多維度安全防護。
結構設計方面，產品外殼采用高強度工程塑料壓鑄成型，具備良好的機械防護性能與絕緣特性，防護等級達到IP40。內部搭載精密電流檢測元件和數字化處理模塊，配合優化散熱結構設計，確保設備在-25℃至+55℃環境溫度下穩定運行。
核心功能特點包含：
- 實時監測三相電流參數，實現過載分級保護
- 短路瞬時斷電保護功能
- 三相不平衡及缺相防護機制
- 內置溫度監測補償系統
- 故障狀態可追溯記憶功能
- 支持遠程狀態指示接口
產品適用于工業生產設備、建筑機電系統、物料輸送裝置、農業機械等領域的電動機保護場景。通過精確的電流采樣技術（采樣精度±1.5%），可有效識別電動機運行狀態異常，配合機械特性優化的操作機構，確保保護動作及時可靠。
技術優勢體現在：
- 采用抗干擾強化設計，適應復雜電磁環境
- 模塊插接式結構便于維護升級
- 寬電壓兼容設計（AC220V/380V自適應）
- 可視化狀態指示窗口
- 機械壽命達10000次以上
產品嚴格執行質量管理體系要求，出廠前經過多道工序檢測，包括高低溫循環測試、振動測試、電氣性能測試等，確保出廠產品性能穩定。安裝方式支持標準導軌安裝與面板固定兩種模式，適配各類配電箱體結構。
二、英文版（約430字）
CDM6I-100M/42002B 63A Molded Case Motor Protection Device Introduction
The CDM6I-100M/42002B 63A is an intelligent motor protection solution designed for three-phase motor systems with rated current up to 63A. Featuring modular architecture and advanced algorithm, this device delivers comprehensive protection for industrial motor applications.
Structural Design:
- High-strength engineering plastic enclosure with IP40 protection
- Optimized thermal management system
- Wide temperature operation range (-25℃ to +55℃)
- Integrated current sensing module with digital processing
Key Functional Features:
- Multi-stage overload protection with dynamic calibration
- Instantaneous short-circuit tripping mechanism
- Phase failure and imbalance detection
- Built-in temperature compensation system
- Fault event recording capability
- Remote status monitoring interface
Application Scope:
Suitable for motor protection in industrial machinery, building service systems, material handling equipment, and agricultural automation. The device demonstrates reliable performance in demanding environments through its enhanced electromagnetic compatibility (EMC) design.
Technical Highlights:
±1.5% current measurement accuracy
Dual mounting options (DIN-rail or panel)
Self-adaptive voltage design (AC220V/380V compatible)
Mechanical durability exceeding 10,000 operations
Visual status indication window
The product incorporates anti-vibration components and corrosion-resistant contacts to ensure long-term reliability. With plug-and-play modular design, maintenance and functional expansion can be performed without disassembling main circuits. The trip mechanism employs dual metal thermal compensation technology to maintain consistent tripping characteristics under varying ambient temperatures.
Pre-delivery quality assurance includes:
- Three-phase symmetrical test
- Insulation resistance verification
- Mechanical endurance evaluation
- Trip timing calibration
Installation flexibility allows integration into both new and retrofit electrical systems. Clear fault indication LEDs assist in rapid troubleshooting, while the standardized form factor ensures compatibility with common distribution panel layouts.
